WELDING ELECTRODE MANUFACTURING PLANT:
1 – Electrode Press EP 360
This press works on hydraulic system. The angle between the flux coating tube and wire feeding unit is 45°. The press is manufactured in various types depending on the production capacity of the electrodes. On the operating panel located on the press , there are several adjustment buttons for pressure , electrode conveyor belt speed  . These are digital displays. All adjustments and controls of the press are made on this operating panel.
Pressure of the machine is max. 350 BARS.
2 – Automatic Wire Feeder IV 85
The wires cut according to the required length are fed from a magazine by means of pushing and pulling pulleys to press outlet mouth at 45° and flux coated wires are transferred on the conveyor belts.
Wire Feeding Speed                : 85 – 850 pcs./min.
Wire diameter                          : Ø 2- Ø 6.00 mm
3 – Electrode Conveyor Belt   EB 12
It is used for the carrying , transferring of flux coated electrode sticks. Also arc end and holding tips are brushed during the transferring of electrodes on this belt. The electrodes on this belt are transferred on to the grids located on the end of the belt . The grids are lifted by a pneumatic system . One operators takes these grids with electrodes and stack them on a trolley to put into the drying furnace. Or , it is possible to send these electrodes directly to the furnace using this conveyor belt. Capacity of the belt is enough to carry all the electrode sticks which comes out from the press as flux coated. The length of the belt is 12 meters.